Horizontal ridge augmentation with porcine bone-derived grafting material: a long-term retrospective clinical study with more than 5 years of follow-up.

Objectives: The purpose of this study was to evaluate the outcomes of implants placed in horizontally augmented alveolar ridges using porcine bone grafts and to investigate the long-term stability of the porcine bone grafts. Materials and Methods: A retrospective analysis was conducted on 49 sites that underwent horizontal ridge augmentation using porcine bone grafts and implant placement with a follow-up period longer than 5 years. Furthermore, additional analysis was conducted on 24 sites where porcine bone grafts were used exclusively for horizontal ridge augmentation and implant placement. Results: The mean follow-up period after prosthesis loading was 67.5 months, with a mean marginal bone loss of 0.23 mm at 1 year and a cumulative mean marginal bone loss of 0.40 mm over the entire follow-up period. Of the 49 implants, 2 were lost and 3 did not meet the success criteria, resulting in a survival rate of 95.9% and a success rate of 89.8%. In 24 sites, the mean marginal bone loss was 0.23 mm at 1 year and 0.41 mm at 65.8 months, with 100% survival and success rates. Conclusion: Porcine bone grafts can be successfully used in horizontal ridge augmentation for implant placement in cases of ridges with insufficient horizontal width.

Tilted implants for implant-supported fixed hybrid prostheses: retrospective review.

Objectives: This review assessed the performance of implant-supported fixed hybrid prostheses in 21 patients who received a total of 137 implants between 2003 and 2010. The implants were evaluated for marginal bone resorption, complications, success rate, and survival rate based on their vertical angularity, type of bone graft, and measured implant stability. Materials and Methods: One-way ANOVA and chi-square tests were used to analyze the relationships among long-term evaluation factors and these variables. The mean initial bone resorption in the implant group with a vertical angle of more than 20° was 0.33 mm and mean final bone resorption was 0.76 mm. In contrast, the mean initial bone resorption in the implant group with a vertical angle of less than 10° was 1.19 mm and mean final bone resorption was 2.17 mm. Results: The results showed that mean bone resorption decreased with an increase in the vertical placement angle of the implants used in fixed hybrid prostheses, as well as in the group without additional bone grafts and those with high implant stability. The success rate of implants placed after bone grafting was found to be higher than those placed simultaneously. Conclusion: These results suggest that implant-supported fixed hybrid prostheses may be an effective treatment option for edentulous patients, and intentionally placing implants with high angularity may improve outcomes.

Comparison of Posttreatment Stability Between Mandibular Setback Surgery-Early and Conventional Surgery in Class III Patients: A 4.6-Year Follow-Up.

OBJECTIVES: This retrospective study aims to compare long-term stability between the mandibular setback surgery-early (MSE) approach, involving minimal orthodontics, and the mandibular setback conventional surgery (MCS) approach, involving sufficient orthodontics, in Class III patients with mandibular prognathism. METHODS: Among 210 patients who underwent orthognathic surgery, a total of 40 subjects were enrolled based on standardized inclusion criteria: only mandibular surgery, <5 mm setback difference between right and left of the mandible, orthodontics with fixed appliances, and more than 2 years of follow-up after treatment. These patients were allocated to the MSE (n = 20) and MCS groups (n = 20) according to the duration of presurgical orthodontics. Changes in cephalometric measurements were compared between the MSE and MCS groups before surgery (T0), 1 month after surgery (T1), at the end of treatment (T2), and posttreatment retention (T3). RESULTS: The MSE and MCS groups had a mean presurgical orthodontic duration of 2 and 9.5 months, respectively. From T1 to T2, the MSE group showed a significantly larger forward movement of the mandible than the MCS group (2.1 versus 0.7 mm; P < 0.001). In addition, from T2 to T3 (average 4.6 years), the MSE group presented anterior relapse of 0.6 mm in the mandible, but there were no statistically significant intergroup differences. CONCLUSION: Although the MSE group showed greater postsurgical forward mandibular relapse than the MCS group, the two groups exhibited similar skeletal and dental stability during the posttreatment retention.

Exploration of the interplay between spatially distinct microbial habitats through comparative analysis.

Objectives: The oral microbiome is closely associated with systemic diseases, indicating the presence of bacteremia and inflammatory mediators in the systemic circulation. Our research aims to investigate the relationship between the oral microbiome and other microbial habitats. Methods: We analyzed 180 specimens from 36 patients, including saliva, buccal swab, plaque, stool, and blood samples from a healthy group (Non_PD, n = 18) and a periodontitis group (PD, n = 18). The final analysis included 147 specimens, with varying sample sizes for each group. Metagenomic analysis was performed using prokaryotic 16S rRNA on the MiSeq platform (Illumina). Results: PD saliva showed significant richness differences (P's < 0.05), similar to plaque. Buccal swabs had slight variations. Microbial network analysis revealed altered microbial interactions in the PD group, with decreased interactions in saliva and buccal swabs, and increased interactions in plaque. In our analysis of nine specimens where all paired habitat samples could be analyzed, microorganisms linked to oral periodontitis were found in sterile blood samples, resembling the oral cavity's composition. Conclusions: Microbiome differences should consider overall microbial-environment interactions, alongside diversity and richness. Our data cautiously suggest that disease-related changes in the salivary microbiome may be reflected in blood specimens through the oral-blood axis.

Survival analysis of implants after surgical treatment of peri-implantitis based on bone loss severity and surgical technique: a retrospective study.

BACKGROUND: Few trials have compared the results of surgical treatment for peri-implantitis based on severity of peri-implantitis and surgical method. This study investigated the survival rate of implants based on type of surgical method used and initial severity of peri-implantitis. Classification of severity was determined based on bone loss rate relative to fixture length. METHODS: Medical records of patients who underwent peri-implantitis surgery from July 2003 to April 2021 were identified. Classification of peri-implantitis was divided into 3 groups (stage 1: bone loss < 25% (of fixture length), stage 2: 25% < bone loss < 50%, stage 3: bone loss > 50%) and performance of resective or regenerative surgery was investigated. Kaplan-Meier survival curves and Cox hazards proportional models were used to analyze the cumulative survival rate of implants. Median survival time, predicted mean survival time, hazard ratio (HR), and 95% confidence interval (CI) were calculated. RESULTS: Based on Kaplan-Meier analysis, 89 patients and 227 implants were included, and total median postoperative survival duration was 8.96 years. Cumulative survival rates for stage 1, 2, and 3 were 70.7%, 48.9%, and 21.3%, respectively. The mean survival time for implants in stage 1, 2, and 3 was 9.95 years, 7.96 years, and 5.67 years, respectively, with statistically significant difference (log-rank p-value < 0.001). HRs for stage 2 and stage 3 were 2.25 and 4.59, respectively, with stage 1 as reference. Significant difference was not found in survival time between resective and regenerative surgery groups in any peri-implantitis stage. CONCLUSIONS: The initial bone loss rate relative to the fixture length significantly correlated with the outcome after peri-implantitis surgery, demonstrating a notable difference in the long-term survival rate. Difference was not found between resective surgery and regenerative surgery in implant survival time. Bone loss rate could be utilized as a reliable diagnostic tool for evaluating prognosis after surgical treatment, regardless of surgical method used. TRIAL REGISTRATION: Retrospectively registered. (KCT0008225).

Effectiveness of ultra-wide implants in the mandibular and maxillary posterior areas: a 5-year retrospective clinical study.

Objectives: Ultra-wide implants may be used as a replacement if existing implants fail. This study was conducted to evaluate the factors influencing the prognosis and failure of ultra-wide implants. Patients and. Methods: This study evaluated whether sex, age, site, diameter, length, additional surgery, implant stability (primary and secondary), and reason for ultra-wide implant placement affect the 5-year survival and success rates and marginal bone loss (MBL) of ultra-wide implants. Seventy-eight ultra-wide implants that were placed in 71 patients (39 males and 32 females) from 2008 to 2010 were studied. One-way ANOVA analysis was conducted to evaluate the statistical significance of MBL according to the patient's sex, implant site, and diameter. Independent sample t-tests were used to determine the statistical significance of MBL analysis which was used to determine the significance of the 5-year success and survival rates related to the variables. One-way ANOVA was conducted to evaluate the statistical significance of sex, implantation site, diameter, and MBL. Independent sample t-tests were used to evaluate the correlation between implantability and MBL for implantation reasons, while additional surgery, length, and Kaplan-Meier analysis were used to evaluate 5-year survival and success rates. Results: The mean age of patients was 54.2 years with a survival rate of 92.3% and a success rate of 83.3% over a mean 97.8-month period of observation. MBL averaged 0.2 mm after one year of prosthetic function loading and 0.54 mm at the time of final observation. Success rates correlated with primary stability (P=0.045), survival rates correlated with secondary stability (P=0.036), and MBL did not correlate with any variables. Conclusion: Ultra-wide implants can be used to achieve secure initial fixation in the maxillary and mandibular molar regions with poor bone quality or for alternative purposes in cases of previous implant failure.

Randomized clinical trial to evaluate the efficacy and safety of two types of sandblasted with large-grit and acid-etched surface implants with different surface roughness.

Objectives: This study aims to evaluate the efficacy and safety of two types of sandblasted with large-grit and acid-etched (SLA) surface implants with different surface roughness. Patients and. Methods: This study was conducted based on a clinical record review of 55 patients (mean age, 53.00 years). A total of 80 SLA surface implants was placed. Among the 80 implants, 38 implants placed in 29 subjects had surface roughness (Ra) of 3.09 µm (test group, TG), while the other 42 implants placed in 31 subjects had a surface roughness (Ra) of 2.50 µm (control group, CG). A comparison was made of implant primary/ secondary stability; success and survival rates; marginal bone loss; and soft tissue assessment including probing pocket depth (PPD), plaque index (PI), gingival index (GI), and bleeding on probing (BOP) between the groups at 1 year after implant placement. Results: Among the implants that were initially registered, 1 from the TG and 4 from the CG dropped out, leaving 37 implants in the TG and 38 implants in the CG to be traced and analyzed. Although 1 TG case showed unstable primary stability, all cases showed stable secondary stability. Success and survival rates at 1 year after implant placement were 100% in both groups. Marginal bone loss was 0.07 mm and 0.00 mm for the TG and CG, respectively, but the difference was not significant. Among the several parameters for evaluation of soft tissue, the TG showed lower PI at 1 year after implant placement (TG=0.00, CG=0.29; P=0.0004), while the remaining categories showed no significant difference between the groups. Conclusion: This study shows that the two types of SLA implants with different surface roughness have no difference in efficacy or safety. Therefore, both of the implants can be used safely and with promising outcomes.

Low Bone Density Predictability of CBCT and Its Relation to Primary Stability of Tapered Implant Design: A Pilot Study.

Research regarding bone density assessment using cone beam computed tomography in low bone density regions is sparse. This in vitro study aimed to evaluate the predictability of cone beam computed tomography for low bone density regions and its correlations with primary implant stability when placing tapered design implants with a stepped osteotomy. Eighteen porcine mandibular condyles were used as simulated low bone density regions. Hounsfield units (HU), obtained via multislice computed tomography, and gray values (GV), obtained via cone beam computed tomography, were measured three times at one-month intervals. The maximum implant insertion torque (MIT) and implant stability quotient (ISQ) were recorded as the taper design implants were placed using a stepped osteotomy. HU and GV were measured as 335.05-803.07 and 389.98-906.40, respectively. For repeated measurements of HU and GV, the intraclass correlation coefficients were 0.989 and 0.980; the corresponding value for mean HU and GV was 0.768. Bland-Altman plots showed a mean difference between HU and GV of -78.15. Pearson correlation coefficients revealed a strong correlation between HU and GV (r=0.91, p<0.01). The mean ± standard deviation values for MIT and ISQ were 36.44 ± 6.64 Ncm and 80.85 ± 2.03, respectively, but no statistically significant correlations were found with GV and HU. Within the study's limitations, GV showed similar bone density estimation compared to HU in soft bones. Tapered implant placement with a stepped osteotomy achieved stable primary implant stability in soft bones. However, these in vitro results need to be approved in further clinical studies.

Assessing Gene Expression Related to Cisplatin Resistance in Human Oral Squamous Cell Carcinoma Cell Lines.

Cisplatin-based chemotherapy has been effectively used to treat oral cancer, but treatment often fails owing to the development of drug resistance. However, the important gene expression alterations associated with these resistances remain unclear. In this study, we aimed to identify the gene expressions related to cisplatin resistance in oral squamous cell carcinoma (OSCC) cell lines. RNA samples were obtained from three cisplatin-resistant (YD-8/CIS, YD-9/CIS, and YD-38/CIS) and -sensitive (YD-8, YD-9, and YD-38) cell lines. Global gene expression was analyzed using RNA sequencing (RNA-Seq). Differentially expressed genes were determined. Based on the gene ontology (GO) and Kyoto Encyclopedia of Genes and Genomes (KEGG) databases, functional enrichment and signaling pathways analyses were performed. Candidate genes selected from RNA-Seq analysis were validated by quantitative real-time polymerase chain reaction (qRT-PCR) analysis. The YD-8/CIS and YD-9/CIS samples had very similar expression patterns. qRT-PCR analysis was performed on selected genes commonly expressed between the two samples. The expression levels of 11 genes were changed in cisplatin-resistant samples compared with their parental samples; several of these genes were related to cell adhesion molecules and proteoglycans in cancer pathways. Our data provide candidate genes associated with cisplatin resistance in OSCC, but further study is required to determine which genes have an important role. Nevertheless, these results may provide new ideas to improve the clinical therapeutic outcomes of OSCC.

The Effect of Whitlockite as an Osteoconductive Synthetic Bone Substitute Material in Animal Bony Defect Model.

This study aimed to evaluate the biomechanical properties in vitro and the bone regeneration of whitlockite (WH) compared with hydroxyapatite (HA) or ß-tricalcium phosphate (ß-TCP)-based material. We investigated the morphology and phase composition of the bone grafts using a scanning electron microscope and X-ray diffractometer patterns and tested the compressive strength. Four circular defects of 8 mm in diameter were created on the calvaria of twelve rabbits. One defect was left empty, and each of the other defects was filled with WH, HA, and ß-TCP. At 4 and 8 weeks, the specimens were harvested to evaluate for the new bone formation and the remaining bone grafts. Regarding the biomechanical properties, the three grafts had a similar micropore size, and WH showed nanopores. The compressive strength of WH was higher than HA and ß-TCP without statistical significance. The radiological and histomorphometric analyses demonstrated that the new bone formation was similar among the groups. The remaining bone graft of the WH group was greater than that of the HA and ß-TCP groups at 4 weeks (p < 0.05), and the total bone area of the WH, HA, and ß-TCP groups was greater than that of the other (p < 0.01). WH has excellent volumetric stability and osteoconductivity compared with HA and ß-TCP.

Effect of Gamma Irradiation on the Osteoinductivity of Demineralized Dentin Matrix for Allografts: A Preliminary Study.

Demineralized dentin matrix (DDM) treated with gamma irradiation (GR) has shown promising results as an allograft without any adverse effects in in vivo and clinical studies. The purpose of this study was to evaluate the effects of 15 and 25 kGy GR on the osteoinductive properties of DDM at extra-skeletal sites. As a control group, non-irradiated DDM powder was implanted into the right subcutaneous tissues of the dorsal thigh muscles of 20 nude mice. DDM powder irradiated with 15 and 25 kGy was implanted into the left side. After two and four weeks, the bone mineral density (BMD) was measured with dual-energy X-ray absorptiometry. After confirming osteoblast- and osteoclast-specific activities by alkaline phosphatase (ALP) and tartrate-resistant acid phosphatase (TRAP) staining, a histological analysis was performed to measure the new bone formation and the number of osteoblasts and osteoclast-like cells on the surface of the DDMs. Histomorphometry was used to calculate the new bone formation area on the surface of the DDM particles (DDMs). The BMD in all the groups increased from two and four weeks without statistically significant differences. The osteoblasts were dominantly activated on DDM without GR, and DDM treated with 25 kGy compared to DDM treated with 15 kGy. Among the groups, new bone formation was identified in all the groups at each time point. In conclusion, GR at doses of 15 and 25 kGy does not affect the osteoinductive properties of DDM powder.

Accuracy of dental implant placement with computer-guided surgery: a retrospective cohort study.

BACKGROUND: The aim of this study was to assess the accuracy of virtual planning of computer-guided surgery based on the actual outcomes of clinical dental implant placement. METHODS: This retrospective study enrolled patients among whom implant treatment was planned using computer-guided surgery with cone beam computed tomography (CBCT). The patients who received implant according to the guide with the flapless and flapped approach were classified as group 1 and 2, respectively, and the others who could not be placed according to the guide were allocated to the drop-out group. The accuracy of implant placement was evaluated with the superimposition of CBCT. RESULTS: We analyzed differences in the deviated distance of the entrance point and deviated angulation of the insertion of implant fixtures. With regard to the surgical approach, group 2 exhibited greater accuracy compared to group 1 in deviation distance (2.22 ± 0.88 and 3.18 ± 0.89 mm, respectively, P < 0.001) and angulation (4.27 ± 2.30 and 6.82 ± 2.71°, respectively, P = 0.001). The limitations of guided surgery were discussed while considering the findings from the drop-out group. CONCLUSIONS: Computer-guided surgery demonstrates greater accuracy in implant placement with the flapless approach. Further research should be conducted to enhance the availability of guides for cases with unfavorable residual bone conditions.

Cisplatin Plus Cetuximab Inhibits Cisplatin-Resistant Human Oral Squamous Cell Carcinoma Cell Migration and Proliferation but Does Not Enhance Apoptosis.

Cisplatin is among the most widely used anticancer drugs used in the treatment of several malignancies, including oral cancer. However, cisplatin treatment often promotes chemical resistance, subsequently causing treatment failure. Several studies have shown that epidermal growth factor receptors (EGFRs) play a variety of roles in cancer progression and overcoming cisplatin resistance. Therefore, this study focused on EGFR inhibitors used in novel targeted therapies as a method to overcome this resistance. We herein aimed to determine whether the combined effects of cisplatin and cetuximab could enhance cisplatin sensitivity by inhibiting the epithelial-to-mesenchymal transition (EMT) process in cisplatin-resistant cells. In vitro analyses of three cisplatin-resistant oral squamous cell carcinoma cells, which included cell proliferation assay, combination index calculation, cell cytotoxicity assay, live/dead cell count assay, Western blot assay, propidium iodide staining assay, scratch assay, and qRT-PCR assay were then conducted. Our results showed that a cisplatin/cetuximab combination treatment inhibited cell proliferation, cell motility, and N-cadherin protein expression but induced E-cadherin and claudin-1 protein expression. Although the combination of cisplatin and cetuximab did not induce apoptosis of cisplatin-resistant cells, it may be useful in treating oral cancer patients with cisplatin resistance given that it controls cell motility and EMT-related proteins.

Comparison of sandblasted and acid-etched surface implants and new hydrophilic surface implants in the posterior maxilla using a 3-month early-loading protocol: a randomized controlled trial.

OBJECTIVES: In this prospective randomized controlled trial, we measured the primary and secondary stability of two surface-treated implants placed in the posterior maxilla, applied 3-month loading protocols, and compared and analyzed the short-term outcomes of the implants. PATIENTS AND METHODS: : From June 2018 to June 2019, patients with a residual bone height of 4 mm in the posterior maxilla were enrolled and randomly divided into two groups to place SA implants (Osstem Implants, Korea) in Group A and NH implants (Hiossen, USA) in Group B. Finally, 14 implants placed in 13 patients in Group A and 17 implants placed in 14 patients in Group B were analyzed. The measured primary and secondary stability of each implant was represented by implant stability quotient (ISQ), and treatment outcomes were evaluated. RESULTS: : Group A consisted of patients with an average age of 62.2 years (range, 48-80 years), and Group B consisted of patients with an average age of 58.1 years (range, 35-82 years). Primary stability was 73.86±6.40 and 71.24±5.32 in Groups A and B, respectively (P=0.222). Secondary stability was 79.07±5.21 in Group A and 78.29±4.74 in Group B (P=0.667). A steep increase in ISQ during the healing period was observed in Group B, though it was not significant (P=0.265). The mean follow-up period was 378.5±164.6 days in Group A and 385.3±167.9 days in Group B. All implants in each group met the success criteria, and the success rate was 100%. CONCLUSION: Two surface-treated implants placed in the posterior maxilla with greater than 4 mm alveolar bone height exhibited successful one-year treatment outcomes if a primary stability of 65 or higher ISQ was obtained and a 3-month early loading protocol was applied.

Prognosis of single tooth implants following alveolar ridge preservation with two recombinant human bone morphogenetic protein-2 delivery systems.

BACKGROUND: We previously reported similar efficacies of alveolar ridge preservation (ARP) on single extraction socket with two different E. coli derived recombinant human bone morphogenetic protein-2 (rhBMP-2) delivery systems (Cowell BMP, Cowell medi Co, Busan, Korea; ß-tricalcium phosphate and hydroxyapatite particle & O-BMP, Osstem Implant Co, Busan, Korea; absorbable collagen sponge). After the trial, we completed implant therapy and observed over an average of 3 years. This follow-up study was performed retrospectively to compare result of implant treatment at the preserved alveolar ridge site. METHODS: Patients who underwent extraction of single tooth and received ARP with one of two rhBMP-2 delivery systems from October 2015 to October 2016 were enrolled. Twenty-eight patients (Group 1: Cowell BMP 14; Group 2: O-BMP 14) who underwent implant therapy and prosthetic treatment were included in study. Stability and marginal bone loss (MBL) of each implant were collected from medical charts and radiographs, and analyzed. The survival and success rates of implants were calculated. RESULTS: The primary implant stability represented by implant stability quotient (ISQ) for Groups 1 and 2 was 69.71 and 72.86, respectively. The secondary implant stability for Groups 1 and 2 was 78.86 and 81.64, respectively. Primary and secondary stabilities were not statistically different (P = 0.316 and 0.185, respectively). MBL at the latest follow-up was 0.014 mm in Group 1 over 33.76 ± 14.31 months and 0.021 mm in Group 2 over 40.20 ± 9.64 months, with no significant difference (P = 0.670). In addition, the success rate of implants was 100% (14/14) in Group 1 and 92.9% (13/14) in Group 2, with survival rate of 100% (14/14) in Group 1 and 92.9% (13/14) in Group 2. CONCLUSIONS: We confirmed good prognosis in both groups as a result of implant therapy after ARP with each of two rhBMP-2 carriers.

Associations between mandibular torus and types of temporomandibular disorders, and the clinical usefulness of temporary splint for checking bruxism.

BACKGROUND: Occlusal stress from oral parafunctional habits is one of the causes of temporomandibular disorders (TMD) and mandibular torus (MT). Although some studies have investigated the correlation between TMD and MT, understanding of the relationships between types of TMD and MT is insufficient. Therefore, we conducted this study to investigate the associations between presence of MT and TMD types. METHODS: This study included 77 patients diagnosed with TMD who first visited our clinic for TMD between March 2019 and July 2020. Among them, 30 (38.9%) had MT, and 54 (70.1%) had oral parafunction. Parafunctional activity during sleep was confirmed using a temporary splint for checking bruxism (TSCB). RESULTS: The relationship between prevalence of MT and oral parafunction in TMD patients was not statistically significant (P = 0.131), but the odds ratio was relatively high at 2.267. An analysis of TMD type revealed that Type I, which is classified as myalgia of the masticatory muscles, and MT had a significant association (P = 0.011). We fabricated a TSCB for 27 patients to wear during sleep and confirmed that 23 (85.2%) had nocturnal bruxism. The TSCB results and presence of MT showed a significant relationship (P = 0.047). CONCLUSION: Through the results of this study, clinicians may consider the hyperactivity of masticatory muscles in the presence of MT when treating TMD patients. In addition, TSCB has a great diagnostic value as it can be easily manufactured and be useful for discovering pre-existing oral parafunctions that patients are not aware of.

Soft Tissue Changes After Clockwise Rotation of Maxillo-Mandibular Complex in Class III Patients: Three-Dimensional Stereophotogrammetric Evaluation.

OBJECTIVES: To evaluate the linear, angular, and volumetric changes of soft tissue after clockwise repositioning of the maxillo-mandibular complex in skeletal class III patients using three-dimensional (3D) stereophotogrammetry and to determine the correlation between changes in the skeletal and soft tissue variables. METHODS: This study included 18 skeletal class III patients who underwent two-jaw surgery; superior impaction and clockwise rotational movement of the maxilla with the rotation center at upper incisors, and setback of the mandible. Lateral cephalograms and 3D photographs taken before and 6 months after surgery were compared. RESULTS: After maxillary impaction of anteriorly 1.7 mm and posteriorly 3.1 mm, and mandibular setback of 8.7 mm, the volume of lower lip and chin region decreased significantly by 33.6 cm3 (13% net change, P < 0.001), while paranasal and upper lip region volume increased by 3.2 cm3 (2%) and 7.2 cm3 (4%), respectively. CONCLUSION: The clockwise rotation of maxillo-mandibular complex in class III patients significantly reduced lower lip and chin volume with minimal increase in paranasal and upper lip volumes. 3D stereophotogrammetry can provide quantitative evaluation of facial soft tissue volumetric changes.

Increased FOXM1 Expression by Cisplatin Inhibits Paclitaxel-Related Apoptosis in Cisplatin-Resistant Human Oral Squamous Cell Carcinoma (OSCC) Cell Lines.

Cisplatin and paclitaxel are commonly used to treat oral cancer, but their use is often limited because of acquired drug resistance. Here, we tested the effects of combined cisplatin and paclitaxel on three parental (YD-8, YD-9, and YD-38) and three cisplatin-resistant (YD-8/CIS, YD-9/CIS, and YD-38/CIS) oral squamous cell carcinoma (OSCC) cell lines using cell proliferation assays and combination index analysis. We detected forkhead box protein M1 (FOXM1) mRNA and protein expression via real-time qPCR and Western blot assays. Cell death of the cisplatin-resistant cell lines in response to these drugs with or without a FOXM1 inhibitor (forkhead domain inhibitory compound 6) was then measured by propidium iodide staining and TdT dUTP nick end labeling (TUNEL) assays. In all six OSCC cell lines, cell growth was more inhibited by paclitaxel alone than combination therapy. Cisplatin-induced overexpression of FOXM1 showed the same trend only in cisplatin-resistant cell lines, indicating that it was associated with inhibition of paclitaxel-related apoptosis. In summary, these results suggest that, in three cisplatin-resistant cell lines, the combination of cisplatin and paclitaxel had an antagonistic effect, likely because cisplatin blocks paclitaxel-induced apoptosis. Cisplatin-induced FOXM1 overexpression may explain the failure of this combination.

Influence of biodegradable polymer membrane on new bone formation and biodegradation of biphasic bone substitutes: an animal mandibular defect model study.

PURPOSE: The purpose of this study was to evaluate the influence of biodegradable polycaprolactone membrane on new bone formation and the biodegradation of biphasic alloplastic bone substitutes using animal models. MATERIALS AND METHODS: In this study, bony defect was formed at the canine mandible of 8 mm in diameter, and the defects were filled with Osteon II. The experimental groups were covered with Osteoguide as barrier membrane, and the control groups were closed without membrane coverage. The proportion of new bone and residual bone graft material was measured histologically and histomorphometrically at postoperative 4 and 8 weeks. RESULTS: At 4 weeks, the new bone proportion was similar between the groups. The proportion of remaining graft volume was 27.58 ± 6.26 and 20.01 ± 4.68% on control and experimental groups, respectively (P < 0.05). There was no significant difference between the two groups in new bone formation and the amount of residual bone graft material at 8 weeks. CONCLUSION: The biopolymer membrane contributes to early biodegradation of biphasic bone substitutes in the jaw defect but it does not affect the bone formation capacity of the bone graft.